Our customers’ most popular stair tread profile is aluminium bullnose non slip stair nosing. The 30mm lip further protects the leading edge of the step and provides extra durability for use at busy public precincts, factories and mine sites.

The bullnose profile is manufactured from high quality aluminium with a 15 micron anodised anti-corrosive surface coating. Guardian Stair Nosing comes with a 5 year product guarantee.

Our stair nosing is a cost-effective solution for increasing stair safety and its natural satin finish provides stairs with a neat, professional finish. It provides a permanent anti slip surface to the front edge of all types of stair surfaces and protects the stair edge from damage.

Guardian Tactile System’s aluminium nonslip stair nosing is a cost effective and efficient solution to quickly increase stair safety to residential and commercial building facilities. Stair nosing is often installed with warning tactiles as per Design for Access and Mobility AS/NZS 1428.4.1:2009, see Guardian Tactile System’s range of tactiles.

Project Gallery

Stair Nosing Inserts

The aluminium Bullnose profile is available with silicon carbide or polyurethane anti-slip inserts to provide maximum safety against slips and trips to interior and exterior stairways.

The heavy duty 1mm x 36# grit thick Silicon Carbide insert guarantees many years of non slip service under heavy foot traffic.

Totally Waterproof and Weatherproof against all kinds of conditions.

Colours: Safety yellow, medium grey, black.

Colour: Black, Terracotta, Grey and Safety Yellow
Substrates: All stairwells – Indoors and Outdoors
Abrasive: 36# Grit Silicon Carbide and Polyurethane
Materials: Silver Anodised Waterproof nosing with Insert
Warranty: Guaranteed for 5 Years
UV Resistance: Yes, tested in Australian harsh conditions

Polyurethane is a durable, oil resistant anti-slip surface with a sleek glossy finish. Perfect for office and interiors.

Colours: Safety yellow, terracotta, black.

CSIRO Laboratory Test: Complies with AS/NZS 4586:2004
Appendix A Test: CSIRO WET Pendulum
Appendix A Results: Class V
Appendix D Test: CSIRO OIL-WET Ramp
Appendix D Results: Class R13
Thickness: 3mm
Turndown: 90 degree angle
Length: 5.8 meter lengths or supplied pre-cut
Size: 80mm x 10mm: Slimline design (ramp back)
75mm x 10mm: Slimline design (recessed back)
80mm x 30mm: Bullnose design (ramp back)

Non Slip Stair Nosing

Our range of aluminium stair nosing is cut to measure from 5.8 meter lengths. Full 5.8 meter lengths are supplied and are ideal for large outdoor stairways. Stair nosing is can be supplied with counter-sunk holes and double-sided backing tape for an adhesive fixing to eliminate metal vibration.

Mechanical fixing ensures that the extruded aluminium stair nosing is screwed downed to the substrate for a permanent installation. Mechanical fixing is ideal for installation on timber, concrete, sand stone and exposed aggregate.

Self Adhesive Fixing

The self adhesive ‘Peel, Bond and Walk’ bonding system is best used for indoor installation on tile and stone where drilling could damage the substrate. The stair nosings are supplied cut-to-size with self adhesive backing, ready for installation.